The STREA-1™ Pro development scale fluid bed is ATEX certified!
Suitable for use with organic solvents - batch capacity 200 grams - 2 kg
The STREA-1™ Pro fluid bed from Aeromatic-Fielder combines 'process ability' and table-top practicality of the well established STREA-1™ Classic with the advantges of OP / PLC Control.
Purpose designed for processing of fine powders, pellets, granules, crystals and tablets, the STREA-1™ Pro is the flexible choice when taking the early steps towards process optimization.
OP / PLC Control
This control system unites functionality and process visualisation with data recording via a separate paperless recorder. It provides a level of process automation with recipe control.
Product drying, top spray granulating and coating – in volumes ranging from 200g to 2kg – can all be handled by the STREA-1™, thanks to its interchangeable components and containers.The STREA-1™ has been supplied to research centres and companies for use in the production of pharmaceuticals, food stuffs, dairy products, fine ceramics and chemicals. Continuing Aeromatic-Fielder’s strong commitment to research and development and high quality standards, the STREA-1™ Pro is a vital addition to the development benchtop.
Dryer
Air is filtered and heated prior to passing through the distributor plate fluidizing the product and absorbing moisture. The product is completely contained within the unit due to the highly efficient product filters.
Granulator
A binding agent is sprayed onto the fluidized product for controlled agglomeration. The formed agglomerates are subsequently dried.
Coater
Liquid is sprayed onto the product from below to ensure uniform coating. An attachment for top spray coating is also available.
Main Features
- Easy manoeuvrability due to table-top size
- Ready to plug into standard laboratory utilities
- Easy operation
- Simple to clean and maintain
- Special air distributor plate for controlled product movement
- HEPA filter for process air
- Continuously operating blow-back filter cleaning system
- Instrumentation for measuring air flow, product and filter pressure drop
- Allen Bradley colour PLC Controls
- Data and trend recording
Available Options
- Two-fluid nozzle for atomizing liquids
- Heatable nozzle for atomizing melts
- Selection of material for product filter
- Air volume control system
- Atomising air control system
- Device for product sampling
- DQ, IQ, OQ qualification on-site and documentation
- PLC-PC communication
Technical Data
|
Product volume |
0.2 - 2 kg |
|
Air Flow |
2m3 / min |
|
Stat. pressure |
5000N / m2 |
|
Motor power |
1.00 kW |
|
Type of current |
single or 3 phase |
|
Heating capacity
delta t = 60° C
delta t = 90° C |
-
1.5 kW (110 volt)
2.2 kW (220 volt) |
|
Container volume |
16.5 litre |
|
Weight |
75 kg |
All parts of the STREA-1 unit are assembled in our own workshop to guarantee the highest level of workmanship. The units are tested at maximum capacity prior to delivery.