STREA-1™ Classic
The STREA-1™ development scale fluid bed is ATEX certified!
The STREA-1™ laboratory fluid bed from Aeromatic-Fielder combines versatility with table-top practicality. Purpose designed for processing of fine powders, pellets, granules, crystals and tablets, the STREA-1™ is the flexible choice when taking the first steps towards process optimization. The STREA-1™ is available with interchangeable components and containers. This gives laboratory flexibility since the equipment can be used for top-spray granulation, drying and coating.
Coater Module
Liquid is sprayed onto the product from below to ensure uniform coating. An attachment for top spray coating is also available.
The STREA-1™ comes in two model:
1. STREA-1™ Classic - Manual operation with the following features and options
Main features
- Easy maneuverability due to table-top size
- Ready to plug into standard laboratory utilities
- Easy operation
- Simple to clean and maintain
- Special air distributor plate for controlled product movement
- Continuously operating blow-back filter cleaning system
Available options
- Instrumentation for measuring air flow, product and filter pressure drop
- Two-fluid nozzle for atomizing liquids
- Heatable nozzle for atomizing melts
- Selection of material for product filter
- Device for product sampling
2. STREA-1™ Pro - uniting an OP / PLC Control System with Proven Process Functionality with the following features and options
Main Features
- Easy manoeuvrability due to table-top size
- Ready to plug into standard laboratory utilities
- Easy operation
- Simple to clean and maintain
- Special air distributor plate for controlled product movement
- HEPA filter for process air
- Continuously operating blow-back filter cleaning system
- Instrumentation for measuring air flow, product and filter pressure drop
- Allen Bradley colour PLC Controls
- Data and trend recording
Available Options
- Two-fluid nozzle for atomizing liquids
- Heatable nozzle for atomizing melts
- Selection of material for product filter
- Air volume control system
- Atomising air control system
- Device for product sampling
- DQ, IQ, OQ qualification on-site and documentation
- PLC-PC communication
Technical Data
|
Product volume |
0.2 - 2 kg |
|
Air Flow |
2m3 / min |
|
Stat. pressure |
5000N / m2 |
|
Motor power ('Classic' model) |
0.75 kW |
|
Motor power ('Pro' model) |
1.00 kW |
|
Type of current |
single or 3 phase |
|
Heating capacity
delta t = 60° C
delta t = 90° C |
-
1.5 kW
2.2 kW |
|
Container volume |
16.5 litre |
|
Weight ('Classic' model) |
43 kg |
|
Weight ('Pro' model) |
75 kg |
All parts of the STREA-1™ unit are assembled in our own workshop to guarantee the highest level of workmanship. The units are tested at maximum capacity prior to delivery.