Niro Pharma Test Station – PSD-1 spray dryer
The Niro Pharma Test Station is the world’s most advanced GMP test station
for spray drying, and can be used to produce material for safety, stability and
toxicology studies and clinical trials. The Test Station includes two GMP spray
drying units, PSD-1 and PSD-4.
The PSD-1 spray dryer uses nitrogen as
the drying medium in a closed loop, which allows for drying of feed compounds
containing organic solvents. While the powder is collected under the cyclone, a
bag filter is used for collecting fines. Alternatively, all powder can be
collected under the bag filter. There are two atomization methods: a pressure
nozzle and a two-fluid nozzle, both operating in a co-current mode.
Main components
|
Feed system |
HEPA-filters |
|
Drying chamber |
Condenser |
|
Cyclone |
Fans |
|
Bag filter |
Electrical heaters |
Feed
The Pharma Test Station is fully equipped to
prepare the feed liquid from required solvents, excipients and API. Various
options are available for filtration of feed.
Solvents
The PSD-1 can operate with a wide range of solvents, including:
| Water |
Acetone |
| Ethanol |
Methylene chloride |
| Methanol |
Ethyl acetate |
| Isopropyl alcohol |
|
Operating parameters
| Inlet temperature: up to 220 °C |
Pressure nozzle, atomization pressure: 10-100 bar |
| Outlet temperature: up to 150 °C |
Two-fluid nozzle, gas pressure:
0,5-14 bar |
| Condenser temperature: down to -18 °C |
Two-fluid nozzle, atomization gas temperature: 18-100 °C |
| Feed rate: up to 10 kg/h (depending on solvent type) |
CIP liquid temperature: Up to 80 °C |
| Feed temperature: 5-80 °C |
|