Available in two sizes: NICA™ E140 Extruder and NICA™ E220 Extruder
The NICA™ Extruder is a low shear extruder designed to incorporate special extrusion technology which guarantees low temperature handling of even the most sensitive products. The extruder can be successfully used for both batch and continuous operations.

NICA™ E140 Extruder
NICA™ E140 Extruder
The E220 model has identical processing characteristics as the smaller E140 but gives typically four times the throughput.

Machine construction makes it particularly suitable for integration into full pellet production lines with direct connection to an upstream granulation and downstream spheronization and drying processes.

Optional designs are available with the E220 as a free-standing piece of equipment or installed in a 'through-the-wall' mode with all routine maintenance form the technical zone.

Principles of Operation
The extruders operate on a plug flow 'first in, first out' principle without stagnant areas. Product hold-up at the end of a run only amounts to a few grams. Two concentric rotors counter rotate within a cylindrical screen. The wet mass is gravity fed into the inner rotor - the 'feeder', which distributes it into cavities between blades on the outer rotor - the 'impeller'. Pressure is generated in a continuous wave as these blades sweep across the inner surface of the screen.

NICA™ extruders can be fitted with a wide range of screens of different hole diameter and wall thickness and the rotors have variable speed drives. This allows a high degree of flexibility in optimizing product compaction and consistency of the extrudate.

Features:

  • Patented high efficiency design
    - gentle treatment of product
    - low product temperature
  • Plug flow - 'first in, first out'
  • Negligible product hold-up
  • Easy to scale-up
  • Different screen and impeller options for production flexibility
  • Easy to dismantle and clean
  • Compact design

E140 Options:

  • Impeller / screen variations
  • Stand with tray (illustrated)
  • Electronic speed control
  • Impeller motor power cell
  • Product temperature probe
  • Flameproof

E220 Options:

  • Impeller / screen variations
  • Through-the-wall construction
  • Impeller motor power cell
  • Product temperature probe
  • Flameproof

Technical Data

E140
E220
Typical throughput
0.5 - 2 kg/min
2 - 8 kg/min
Modules - Feeder
0.37 kW + variator
20 - 160 rpm
2.2 kW + inverter
15 - 90 rpm
Modules - Impeller
0.75 kW + variator
20 - 140 rpm
4.0 kW + inverter
10 - 85 rpm
Utilities
380 - 415 volts
3 phase
50 Hz
380 - 415 volts
3 phase
50 Hz

Plant Integration
Whatever the throughput requirement and choice of extruder, we offer a full plant integration and customisation capability extending from bulk materials handling into the granulatin stage through to drying and coating of the finished pellets.

Options

  • Upstream connection to mixer/granulator
  • Downstream connection to one or more spheronizers
  • Integration of controls
  • Interface with C.I.M


 

 Back  Top of page